Clinical and radiographic performance of late placed and early loaded dental implants with a conditioned hydrophilic surface in posterior mandible sites: A prospective case series with an 8.5- to 9.5-year follow-up.

OBJECTIVE: To assess the clinical outcomes by means of implant and prosthetic survival of late placed and early loaded implants with a hydrophilic, moderately rough surface for partially edentulous patients after a follow-up of 8.5 to 9.5 years. MATERIALS AND METHODS: A prospective case series study involving 15 patients with single, late placed and early loaded implants in the posterior mandible was performed. Clinical and radiographical parameters, including biological and technical complications and patient satisfaction, were assessed. RESULTS: From an initial sample of 15 patients, 12 were included. A total of 16 implants were observed. After a mean follow-up of 9 years and 7 months (SD ± 3.8 months), implant success and survival rate were 100%. The prosthetic survival rate was 100%, and the prosthetic success rate was 93.8% since a major chipping was observed. No biological complications were observed, and the mean modified plaque index was 0.03 (SD ± 0.09) with a mean probing pocket depth of 2.95 mm (SD ± 0.09). A mean marginal bone level (MBL) of 0.04 mm (SD ± 0.88) and a mean VAS of 9.42 (SD ± 0.90) for patient satisfaction were recorded. CONCLUSION: Late placed and early loaded implants with a moderately rough endosseal surface are a reliable option for rehabilitating partially edentulous patients. An implant survival rate of 100% and a prosthodontic success rate of 93.8% were observed. Patient satisfaction scores were high and peri-implant hard and soft tissues remained healthy. The study findings should be carefully interpreted because of the small sample.

Incidental findings in cone beam computed tomography (CBCT) scans for implant treatment planning: a retrospective study of 404 CBCT scans.

OBJECTIVES: To investigate the prevalence of incidental findings and need for further dental treatment and analyse the influence of size of field-of-view (FOV) and age in cone beam computed tomography (CBCT) for pre-implant planning. METHODS: 404 CBCT scans were examined retrospectively for incidental findings and need for further dental treatment. Incidental finding-frequencies and need for further treatment were assessed for different age (< 40 years, 40-60 years, > 60 years) and FOV groups (small, medium, large). Intraexaminer and interexaminer agreements were evaluated. RESULTS: In 82% of the scans at least one incidental finding was found, with a total of 766 overall. More incidental findings were found in scans with large FOV (98% vs. 72%, OR = 22.39 large vs. small FOV, p < 0.0001) and in scans of patients > 60 years (OR = 5.37 patient's age > 60 years vs. < 40 years, p = 0.0003). Further dental treatment due to incidental findings was needed in 31%. Scans with large FOV were more likely to entail further treatment (OR = 3.55 large vs. small FOV, p < 0.0001). Partial edentulism and large FOV were identified as risk factors for further treatment (p = 0.0003 and p < 0.0001). Further referral of the patient based on incidental findings was judged as indicated in 5%. Intra- and inter-examiner agreements were excellent (kappa = 0.944/0.805). CONCLUSIONS: A considerable number of incidental findings with need for further dental treatment was found in partially edentulous patients and in patients > 60 years. In pre-implant planning of elderly patients, the selection of large FOV CBCT scans, including dentoalveolar regions not X-rayed recently, help to detect therapeutically relevant incidental findings.

Positional accuracy during the sequence of static computer-assisted implant surgery in three alveolar ridge morphologies: An in vitro study.

PURPOSE: This in vitro study aimed to assess the positional accuracy during the sequence of static computer-assisted implant surgery (sCAIS) according to the anatomical characteristics of the alveolar ridge. MATERIAL AND METHODS: Maxillary bone models with six single tooth gaps including clinical scenarios of healed alveolar ridge (HR), single-rooted (SRS), and three-rooted socket (TRS) morphologies were used in this study. Positional deviations during implant placement procedures were evaluated after the pilot osteotomy (PD), final osteotomy (FD), and implant placement with respect to the pre-planned implant position by using a software package. ANOVA and post hoc analyses were performed. RESULTS: A total of 90 implants were included in this study. Higher mean angular, crestal, and apical deviations were found after the PD and FD (3.5 ± 2.4°, 0.7 ± 0.3 mm, and 1.4 ± 0.8 mm versus 3.6 ±2.2°, 0.6 ± 0.3 mm, and 1.2 ± 0.6 mm) compared to IP (2.8 ± 1.6°, 0.7 ± 0.3 mm, and 1.2 ± 0.5 mm, p ≤ 0.004). Implants placed in TRS demonstrated higher mean angular, crestal, and apical deviations (4.0 ± 1.7°, 0.8 ± 0.3 mm, and 1.6 ± 0.5 mm) compared to implants placed in SRS (2.5 ± 1.2°, 0.7 ± 0.3 mm, and 1.1 ± 0.4 mm) or HR (2.0 ± 0.9°, 0.5 ± 0.3 mm, and 0.8 ± 0.4 mm, p < 0.001). CONCLUSIONS: Positional deviations during sCAIS procedures are initiated with the first implant osteotomy and persist throughout the drilling sequence. However, deviations slightly decreased after implant placement. The alveolar ridge morphology is strongly associated with positional deviations. Higher deviations were observed in three-rooted and single-rooted sockets simulating an immediate approach compared to healed sites simulating a delayed protocol.

Group 1 ITI Consensus Report: The role of bone dimensions and soft tissue augmentation procedures on the stability of clinical, radiographic, and patient-reported outcomes of implant treatment.

OBJECTIVES: The aims of Working Group 1 were to address the role (i) of the buccolingual bone dimensions after implant placement in healed alveolar ridge sites on the occurrence of biologic and aesthetic complications, and (ii) of soft tissue augmentation (STA) on the stability of clinical, radiographic, and patient-related outcomes of implant treatments. MATERIALS AND METHODS: Two systematic reviews were prepared in advance of the Consensus Conference and were discussed among the participants of Group 1. Consensus statements, clinical recommendations, recommendations for future research, and reflections on patient perspectives were based on structured group discussions until consensus was reached among the entire group of experts. The statements were then presented and accepted following further discussion and modifications as required by the plenary. RESULTS: Dimensional changes of the alveolar ridge occurred after implant placement in healed sites, and a reduction in buccal bone wall thickness (BBW) of 0.3 to 1.8 mm was observed. In healed sites with a BBW of <1.5 mm after implant placement, increased vertical bone loss, and less favorable clinical and radiographic outcomes were demonstrated. Implants with buccal dehiscence defects undergoing simultaneous guided bone regeneration, showed less vertical bone loss, and more favorable clinical and radiographic outcomes, compared to non-augmented dehiscence defects during initial healing. At healthy single implant sites, probing depths, bleeding and plaque scores, and interproximal bone levels evaluated at 1 year, remained stable for up to 5 years, with or without STA. When single implant sites were augmented with connective tissue grafts, either for soft tissue phenotype modification or buccal soft tissue dehiscence, stable levels of the soft tissue margin, and stable or even increased soft tissue thickness and/or width of keratinized mucosa could be observed from 1 to 5 years. In contrast, non-augmented sites were more prone to show apical migration of the soft tissue margin in the long-term. Favorable aesthetic and patient-reported outcomes after STA were documented to be stable from 1 to 5 years. CONCLUSIONS: It is concluded that dimensional changes of the alveolar ridge occur after implant placement in healed sites and that sites with a thin BBW after implant placement are prone to exhibit less favorable clinical and radiographic outcomes. In addition, it is concluded that STA can provide stable clinical, radiographic, aesthetic, and patient-reported outcomes in the medium and long-term.

Accuracy of implant placement in the posterior maxillary region depending on the alveolar residual bone height and sinus morphology: An in vitro study.

OBJECTIVES: The primary aim of this in vitro study was to assess the effect of alveolar residual bone height in the posterior maxilla on the accuracy of the final implant position via free-handed and static Computer-Assisted Implant Placement (sCAIP). The secondary aim was to evaluate the influence of the maxillary sinus morphology on the accuracy of final implant position. MATERIALS AND METHODS: Partially edentulous standardized maxillary models simulating three different residual bone heights and different sinus floor morphologies were investigated. One-hundred eighty equally distributed implants, which were placed either free-handed or sCAIP, constituted the study sample. 3D digital deviations were obtained by superimposing the post-surgical scans on the initial treatment plan. RESULTS: Angular and linear deviation assessment demonstrated higher implant position accuracy in the sCAIP group. sCAIP revealed similar outcomes independently of the alveolar bone height and sinus floor morphology. Contrarily, in the free-handed group, alveolar bone height and sinus morphology statistically affected the final implant position. Non-parametric three-way ANOVA showed significance for implant placement protocol (p < .0001) and alveolar bone height (p ≤ .02) when angular, and linear deviations were evaluated. Sinus morphology was statistically significantly associated with angular deviation (p = .0009). CONCLUSIONS: sCAIP demonstrated higher 3D implant position accuracy. Alveolar bone height (strongly) and sinus morphology are associated with the accuracy of final implant position when the free-handed implant protocol is followed. However, these anatomical factors did not affect final implant position during sCAIP.

Interproximal Soft Tissue Height Changes After Unassisted Socket Healing versus Alveolar Ridge Preservation Therapy.

The primary aim of this study was to evaluate the efficacy of alveolar ridge preservation (ARP) therapy compared with unassisted socket healing (USH) in attenuating interproximal soft tissue atrophy. Adult subjects that underwent maxillary single-tooth extraction with or without ARP therapy were included in this study. Surface scans and cone beam computed tomography were obtained to digitally assess interproximal soft tissue height changes and measure facial bone thickness (FBT), respectively. Logistic regression models were conducted to investigate the individual effect of demographic and clinical variables. Ninety-six subjects (USH=49; ARP=47) constituted the study population. Linear soft tissue assessments revealed a significant reduction of the interproximal soft tissue over time within and between groups (P<.0001). ARP therapy significantly attenuated interproximal soft tissue height reduction compared to USH (USH mesial: -2.0±0.9mm vs. ARP mesial: -1.0±0.5mm / USH distal -1.9±0.7mm vs. ARP distal: -1.1±0.5mm; P<.0001). Thin FBT (≤1mm) upon extraction was associated with greater interproximal soft tissue atrophy compared with thick FBT (>1mm), independently of the treatment received (P<.0001). Nevertheless, ARP therapy resulted in better preservation of interproximal soft tissue height especially in thin bone phenotype by a factor of 2 for the mesial site (+1.3mm) and a factor of 1.6 (+0.9mm) for the distal site. This study demonstrated that ARP therapy largely attenuates interproximal soft tissue dimensional reduction after maxillary single-tooth extraction compared with USH.

Non-invasive assessment of peri-implant mucosal thickness: A cross-sectional study.

BACKGROUND: This study aimed to evaluate the reliability and reproducibility of different non-invasive methods for the assessment of peri-implant mucosal thickness. METHODS: Subjects with two adjacent dental implants in the central maxillary region were included in this study. Three different methods to assess facial mucosal thickness (FMT) were compared: digital file superimposition using Digital Imaging and Communication in Medicine (DICOM) and stereolithography (STL) files of the arch of interest (DICOM-STL), DICOM files alone, and non-ionizing ultrasound (US). Inter-rater reliability agreements between different assessment methods were analyzed using inter-class correlation coefficients (ICCs). RESULTS: A total of 50 subjects with 100 bone-level implants constituted the study population. Assessment of FMT using STL and DICOM files demonstrated excellent inter-rater reliability agreement. Mean ICC values of 0.97 and 0.95 were observed in the DICOM-STL and DICOM groups, respectively. Comparison between the DICOM-STL and US revealed good agreement, with an ICC of 0.82 (95% CI: 0.74 to 0.88) and a mean difference of -0.13 ± 0.50 mm (-1.13 to 0.86). Comparison between DICOM files alone versus US showed good agreement, with an ICC of 0.81 (95% CI: 0.73 to 0.89) and a mean difference of -0.23 ± 0.46 mm (-1.12 to 0.67). Comparison between DICOM-STL and DICOM files revealed excellent agreement, with an ICC of 0.94 (95% CI: 0.91 to 0.96) and a mean difference of 0.1 ± 0.29 mm (LOA -0.47 to 0.46). CONCLUSIONS: Quantification of peri-implant mucosal thickness via analysis of DICOM-STL files, DICOM files, or US assessment are comparably reliable and reproducible methods.

Local Concentrations of TGF-ß1 and IGF-1 Appear Determinant in Regulating Bone Regeneration in Human Postextraction Tooth Sockets.

Healing after tooth extraction involves a series of reparative processes affecting both alveolar bone and soft tissues. The aim of the present study was to investigate whether activation of molecular signals during the healing process confers a regenerative advantage to the extraction socket soft tissue (ESsT) at 8 weeks of healing. Compared to subepithelial connective tissue graft (CTG), qRT-PCR analyses revealed a dramatic enrichment of the ESsT in osteogenic differentiation markers. However, ESsT and CTG shared characteristics of nonspecialized soft connective tissue by expressing comparable levels of genes encoding abundant extracellular matrix (ECM) proteins. Genes encoding the transforming growth factor-ß1 (TGF-ß1) and its receptors were strongly enriched in the CTG, whereas the transcript for the insulin-like growth factor-1 (IGF-1) showed significantly high and comparable expression in both tissues. Mechanical stimulation, by the means of cyclic strain or matrix stiffness applied to primary ESsT cells (ESsT-C) and CTG fibroblasts (CTG-F) extracted from the tissue samples, revealed that stress-induced TGF-ß1 not exceeding 2.3 ng/mL, as measured by ELISA, in combination with IGF-1 up to 2.5 ng/mL was able to induce the osteogenic potential of ESsT-Cs. However, stiff matrices (50 kPa), upregulating the TGF-ß1 expression up to 6.6 ng/mL, caused downregulation of osteogenic gene expression in the ESsT-Cs. In CTG-Fs, endogenous or stress-induced TGF-ß1 ≥ 4.6 ng/mL was likely responsible for the complete lack of osteogenesis. Treatment of ESsT-Cs with TGF-ß1 and IGF-1 proved that, at specific concentrations, the two growth factors exhibited either an inductive-synergistic or a suppressive activity, thus determining the osteogenic and mineralization potential of ESsT-Cs. Taken together, our data strongly warrant the clinical exploration of ESsT as a graft in augmentative procedures during dental implant placement surgeries.

Influence of drilling sequence and guide-hole design on the accuracy of static computer-assisted implant surgery in extraction sockets and healed sites-An in vitro investigation.

OBJECTIVES: To evaluate the effect of drilling sequence, guide-hole design, and alveolar ridge morphology on the accuracy of implant placement via static computer-assisted implant surgery (sCAIS). MATERIALS AND METHODS: Standardized maxillary bone models including single-tooth gaps with fresh extraction sockets or healed alveolar ridge morphologies were evaluated in this study. Implants were placed using different drilling sequences (i.e., complete [CDS] or minimum [MDS]), and guide-hole designs (i.e., manufacturer's sleeve [MS] or sleeveless [SL] guide-hole designs). The time for implant placement via sCAIS procedures was also recorded. The angular, crestal, and apical three-dimensional deviations between planned and final implant positions were digitally obtained. Statistical analyses were conducted by a non-parametric three-way ANOVA (α = .05). RESULTS: Based on a sample size analysis, a total of 72 implants were included in this study. Significantly higher implant position accuracy was found at healed sites compared to extraction sockets and in SL compared to MS guide-hole design in angular, crestal, and apical 3D deviations (p ≤ .048). A tendency for higher accuracy was observed for the CDS compared to the MDS, although the effect was not statistically significant (p = .09). The MDS required significantly shorter preparation times compared with CDS (p < .0001). CONCLUSION: Implant placement via sCAIS resulted in higher accuracy in healed sites than extraction sockets, when using SL compared to MS guides, and tended to be more accurate when using CDS compared to MDS. Therefore, even though surgery time was shorter with MDS, its use should be limited to strictly selected cases.

Accuracy of keyless vs drill-key implant systems for static computer-assisted implant surgery using two guide-hole designs compared to freehand implant placement: an in vitro study.

PURPOSE: This in vitro study aimed at comparing the accuracy of freehand implant placement with static computer-assisted implant surgery (sCAIS), utilizing a keyless and a drill-key implant system and two guide-hole designs. METHODS: A total of 108 implants were placed in 18 partially edentulous maxillary models simulating two different alveolar ridge morphologies. 3D digital deviations between pre-planned and post-operative implant positions were obtained. Guide material reduction was assessed in the keyless implant system for the manufacturer's sleeve and sleeveless guide-hole designs. RESULTS: sCAIS using a sleeveless guide-hole design demonstrated smaller mean angular, crestal and apical deviations compared to sCAIS utilizing a manufacturer's sleeve and the freehand group (2.6 ± 1.6°, vs 3.3 ± 1.9°, vs 4.0 ± 1.9°; 0.5 ± 0.3 mm, vs 0.6 ± 0.3 mm, vs 0.8 ± 0.3 mm; and 1.0 ± 0.5 mm, vs 1.2 ± 0.7 mm, vs 1.5 ± 0.6 mm). Smaller angular and apical mean deviations were observed in the keyless implant system as compared with the drill-key implant system (3.1 ± 1.7°, vs 3.5 ± 1.9°, p = 0.03; and 1.2 ± 0.6 mm, vs 1.4 ± 0.7 mm, p = 0.045). Overall, smaller angular, crestal, and apical deviations (p < 0.0001) were observed in healed alveolar ridges (2.4 ± 1.7°, 0.5 ± 0.3 mm, and 0.9 ± 0.5 mm) than in extraction sockets (4.2 ± 1.6°, 0.8 ± 0.3 mm, and 1.6 ± 0.5 mm). Higher mean volumetric material reduction was observed in sleeveless than in manufacturer's sleeve guide-holes (- 0.10 ± 0.15 mm3, vs - 0.03 ± 0.03 mm3, p = 0.006). CONCLUSIONS: Higher final implant positional accuracy was observed in sCAIS for the keyless implant system, with a sleeveless guide-hole design, and in healed ridges. Sleeveless guide holes resulted in higher volumetric material reduction compared with the manufacturer's sleeve.

Influence of alveolar ridge morphology and guide-hole design on the accuracy of static Computer-Assisted Implant Surgery with two implant macro-designs: An in vitro study.

OBJECTIVES: The primary aim of this in vitro study was to evaluate the influence of alveolar ridge morphologies on the accuracy of static Computer-Assisted Implant Surgery (sCAIS). The secondary aims were to evaluate the influence of guide-hole design and implant macro-design on the accuracy of the final implant position. METHODS: Eighteen standardized partially edentulous maxillary models with two different types of alveolar ridge morphologies were used. Each model was scanned via cone beam computer tomography prior to implant placement and scanned with a laboratory scanner prior to and following implant placement using sCAIS. The postsurgical scans were superimposed on the initial treatment planning position to measure the deviations between planned and postsurgical implant positions. RESULTS: Seventy-two implants were equally distributed to the study groups. Implants placed in healed alveolar ridges showed significantly lower mean deviations at the crest (0.36 ± 0.17 mm), apex (0.69 ± 0.36 mm), and angular deviation (1.86 ± 0.99°), compared to implants placed in fresh extraction sites (0.80 ± 0.29 mm, 1.61 ± 0.59 mm, and 4.33 ± 1.87°; all p<0.0001). Implants placed with a sleeveless guide-hole design demonstrated significantly lower apical (1.02 ± 0.66 mm) and angular (2.72 ± 1.93°) deviations compared to those placed with manufacturer's sleeves (1.27 ± 0.67 mm; p = 0.01, and 3.46 ± 1.9°; p = 0.02). Deep-threaded tapered bone level implants exhibited significantly lower deviations at the crest (0.49 ± 0.28 mm), apex (0.97 ± 0.63 mm), and angular deviations (2.63 ± 1.85°) compared to shallow-threaded parallel-walled bone level implants (0.67 ± 0.34 mm; p = 0.0005, 1.32 ± 0.67 mm; p = 0.003, and 3.56 ± 1.93°; p = 0.01). CONCLUSIONS: The accuracy of the final implant position with sCAIS is determined by the morphology of the alveolar ridge, the design of the guide holes, and the macrodesign of the implant. CLINICAL SIGNIFICANCE: Higher accuracy in the final implant position was observed with implants placed in healed alveolar ridge morphologies, in implants with deep-threaded tapered macro-design, and when sleeveless surgical guide holes were used.

[Re-osseointegration of a Dental Implant with Aseptic Loosening after Occlusal Correction: a Case Report]. / Aseptischer Verlust der Osseointegration von Implantaten ­ ist eine Reosseointegration möglich? Reosseointegration eines mobilen Implantates nach okklusaler Entlastung: ein Zufallsbefund.

The preservation of osseointegration is fundamental for the long-term success of dental implants. Breakdown of osseointegration may occur in cases of aseptic implant loosening, a poorly understood process leading to sudden implant failure. So far, no evidence-based therapy concept exists for implants with aseptic loosening. The present case report demonstrates the re-osseointegration of a dental implant in the mandible of a 79-year-old female patient with mamma carcinoma after loss of osseointegration caused by aseptic loosening. The only treatment performed was a correction of the occlusion. After a period of eight months, a re-osseointegration was observed clinically and radiographically, and remained stable for the follow-up period of 21 months. Reduction of occlusal forces after correction of the occlusion may have facilitated a re-osseointegration. Potential influences of concurrent antineoplastic chemotherapy regarding breast carcinoma or further unknown influences on implant re-osseointegration cannot be ruled out.

[Misinterpretation of a periapical radiograph: the canalis sinuosus mimicking a root resorption]. / Fehlinterpretation im Röntgenbild. Der Canalis sinuosus als radiologisch-anatomische Vortäuschung einer Wurzelresorption.

There is widespread knowledge that the mental foramen or incisive foramen can be projected onto tooth roots in conventional radiographs, thus simulating apical lesions. In contrast, the anatomical structure of the canalis sinuosus and its branching canals in the anterior maxilla are less known. Sometimes these bone canals mimic a dentino- or osteolysis on conventional radiographs. If these bone canals project onto the roots of the anterior maxillary teeth, there is a risk of misinterpretation as root resorption or apical periodontitis. This case report presents an incidental radiological finding. Due to a radiolucency within the root of tooth 11, root resorption was suspected. Using cone beam-computed tomography, the origin of this radiolucency was clearly identified as an anatomical structure, and the suspected diagnosis was ruled out. This case highlights the importance of the knowledge of anatomical structures to avoid misinterpretations and unnecessary treatments.

Outcome of Periapical Surgery in Molars: A Retrospective Analysis of 424 Teeth.

INTRODUCTION: The objective of this retrospective study was to assess the outcome of periapical surgery in a large number of molars in order to identify possible variables that might affect the outcome. METHODS: The healing outcome of patients undergoing periapical surgery of molars from October 1999 to October 2019 was retrospectively evaluated. Outcome was dichotomized into "healed" and "nonhealed" using well-established clinical and radiographic healing criteria. The potential influence of patient-, tooth-, and treatment-related parameters on the healing outcome was analyzed. RESULTS: A total of 424 molars in the same number of patients (45.5% male and 54.5% female) were evaluated. Three hundred seventy-two molars were classified as healed (87.7%). Three significant outcome predictors were identified: 1-year follow-up versus >1-5 years, >5-10 years, and >10 years (95.3% vs 82.2%, 76.3%, and 76.5% healed, respectively; P < .0001); root end filling material with bioceramic root repair material versus mineral trioxide aggregate (96.9% vs. 86.3% healed, respectively; P = .001); and preoperative evaluation based on cone-beam computed tomographic imaging versus 2-dimensional radiography (90.2% vs 81.4% healed, respectively; P = .02). Sex, age, tooth location, type of restoration, attachment level, presence of a post, quality of the root canal filling, technique of root end preparation, administration of antibiotics, and type of surgery had no significant impact on the healing outcome. CONCLUSIONS: The healed rate for the concave (Retroplast) and cavity (mineral trioxide aggregate, SuperEBA [Staident International, Staines, UK], and bioceramic root repair material) root end preparation technique over all follow-up periods was 84% and 88.5%, respectively. The follow-up period, root end filling material, and preoperative evaluation based on cone-beam computed tomographic imaging had a significant influence on the healing outcome.

Long-term effectiveness of 6 mm micro-rough implants in various indications: A 4.6- to 18.2-year retrospective study.

OBJECTIVES: To evaluate the long-term effectiveness of 6 mm implants in various indications with a micro-rough surface after 4.6-18.2 years in function and to assess key factors associated with implant survival, success, and biologic/technical complications. MATERIALS AND METHODS: Fifty-five patients with seventy-four 6 mm implants placed from 2000 to 2013 attended the re-examination assessing well-established clinical and radiographic parameters, biologic and prosthetic complications, and patient-reported outcome measures. RESULTS: Five implants were lost after a mean follow-up period of 9.1 years resulting in a survival rate of 93.2%. All losses occurred in free-end situations in the mandible. Smoking habit significantly reduced implant survival (hazard ratio 36.25). Two implants exhibited a history of peri-implantitis, and one implant showed progressive marginal bone loss (MBL) resulting in a success rate of 89.2%. The mean MBL amounted to 0.029 mm. Increased MBL was found for implants placed in the maxilla (0.057 mm) and for implants with a diameter of 4.1 mm (0.043 mm). Soft tissue thickness (1.39 mm) and width of keratinized mucosa (1.91 mm) had no effect on MBL. Patient-reported outcome measures showed high satisfaction (mean VAS scores 88%) and high quality of life (mean OHIP-G14 score 2.2). CONCLUSION: The present study demonstrated survival and success rates of 93.2% and 89.2% for 6 mm implants used in various indications. A factor leading to higher implant failure was smoking, whereas modulating factors increasing annual MBL included implants placed in the maxilla and implants with a diameter of 4.1 mm compared to 4.8 mm.

Cellular responses to deproteinized bovine bone mineral biofunctionalized with bone-conditioned medium.

OBJECTIVES: The aim of the study was to investigate whether the osteoinductive properties of bone-conditioned medium (BCM) harvested from cortical bone chips within a clinically relevant short-term period can enhance the biologic characteristics of deproteinized bovine bone mineral (DBBM) in vitro. MATERIALS AND METHODS: To assess the biofunctionalization of DBBM, the adhesive, proliferative, and differentiation properties of mesenchymal stromal ST2, pre-osteoblastic MC3T3-E1, and primary bone-derived cells grown on BCM-coated DBBM were examined by crystal violet staining of adherent cells, BrdU ELISA, and qRT-PCR, respectively. RESULTS: BCM extracted within 20 min or 24 h in either Ringer's solution (BCM-RS) or RS mixed with autologous serum (BCM-RS + S) increased the adhesive properties of all three cell types seeded on DBBM. The 20-min BCM-RS preparation appeared more potent than the 24-h preparation. BCM-RS made within 20 min or 24 h had strong pro-proliferative effects on all cell types grown on DBBM. RS + S alone exhibited a considerable pro-proliferative effect, suggesting an impact of the serum on cellular growth. DBBM coated with BCM-RS or BCM-RS + S, made within 20 min or 24 h each, caused a significant induction of osteogenic differentiation marker expression with a higher potency of the BCM-RS + S. Finally, a strong additive effect of fresh bone chips combined with BCM-coated DBBM on the osteogenic differentiation of the three cell types was observed. CONCLUSIONS: Altogether, the data strongly support the biofunctionalization of DBBM with BCM extracted within a clinically relevant time window of 20 min. CLINICAL RELEVANCE: Pre-activation of non-osteoinductive biomaterials with BCM, prepared from autologous bone chips during a guided bone regeneration (GBR) procedure, bears the potential of an optimal treatment modality for bone defects in daily practice.

Early Loading of Titanium Dental Implants with an Intraoperatively Conditioned Hydrophilic Implant Surface: 3-Year Results of a Prospective Case Series Study.

PURPOSE: The hydrophilic implant surface (INICELL) is a chemical alteration of a sandblasted and thermally acid-etched surface that should lead to long-term osseointegration. This study investigated 3-year results after early loading of implants with a hydrophilic, moderately rough surface in occlusal contact. MATERIALS AND METHODS: This prospective case series study was conducted in subjects with partially edentulous mandibles. Implants were placed on day 21 and loaded with a provisional reconstruction after at least 21 days of healing (baseline, day 0) if their implant stability quotient (ISQ) was ≥ 70 (mean of three measurements) and were replaced by definitive porcelain-fused-to-metal prostheses at the 6-month follow-up visit. Follow-up examinations were planned 1, 3, 6, 12, and 36 months after baseline. RESULTS: A total of 20 implants were placed in 15 patients (mean age: 51 years, range: 32 to 67 years). After 36 months, all implants were osseointegrated, and no suppuration was recorded. Small changes of bone level were observed between 3 months and 36 months. At 36 months, the median values of the 20 implants were 0.25 (range: 0 to 0.5, SD: 0.17), 0.25 (range: 0 to 1, SD: 0.27), and 4 (range: 2 to 7.25, SD: 1.17) for the mean modified Plaque Index (mPI), mean modified Sulcus Bleeding Index (mSBI), and mean probing pocket depth, respectively. The pairwise analysis between 3 and 36 months showed an improvement in the mean mPI (P = .0126) and mean mSBI (P = .0059). After 36 months, all patients (n = 15) were fully satisfied with a mean of 9.43 (range: 8 to 10, SD: 0.678) at the visual analog scale. CONCLUSION: Early functional loading of implants with a hydrophilic, moderately rough outer surface in occlusal contact 21 days after healing appears to be a safe and feasible treatment option when placed in the posterior mandible of partially edentulous patients.

Role of hyaluronan in regulating self-renewal and osteogenic differentiation of mesenchymal stromal cells and pre-osteoblasts.

OBJECTIVES: The aim of the study was to investigate the impact of two hyaluronan (HA) formulations on the osteogenic potential of osteoblast precursors. MATERIALS AND METHODS: Proliferation rates of HA-treated mesenchymal stromal ST2 and pre-osteoblastic MC3T3-E1 cells were determined by 5-bromo-20-deoxyuridine (BrdU) assay. Expression of genes encoding osteogenic differentiation markers, critical growth, and stemness factors as well as activation of downstream signaling pathways in the HA-treated cells were analyzed by quantitative reverse transcription-polymerase chain reaction (qRT-PCR) and immunoblot techniques. RESULTS: The investigated HAs strongly stimulated the growth of the osteoprogenitor lines and enhanced the expression of genes encoding bone matrix proteins. However, expression of late osteogenic differentiation markers was significantly inhibited, accompanied by decreased bone morphogenetic protein (BMP) signaling. The expression of genes encoding transforming growth factor-ß1 (TGF-ß1) and fibroblast growth factor-1 (FGF-1) as well as the phosphorylation of the downstream signaling molecules Smad2 and Erk1/2 were enhanced upon HA treatment. We observed significant upregulation of the transcription factor Sox2 and its direct transcription targets and critical stemness genes, Yap1 and Bmi1, in HA-treated cells. Moreover, prominent targets of the canonical Wnt signaling pathway showed reduced expression, whereas inhibitors of the pathway were considerably upregulated. We detected decrease of active ß-catenin levels in HA-treated cells due to ß-catenin being phosphorylated and, thus, targeted for degradation. CONCLUSIONS: HA strongly induces the growth of osteoprogenitors and maintains their stemness, thus potentially regulating the balance between self-renewal and differentiation during bone regeneration following reconstructive oral surgeries. CLINICAL RELEVANCE: Addition of HA to deficient bone or bony defects during implant or reconstructive periodontal surgeries may be a viable approach for expanding adult stem cells without losing their replicative and differentiation capabilities.

Effects of local application of alendronate on early healing of extraction socket in dogs.

OBJECTIVE: The aim of the present study was to assess the effects of alendronate (ALN) on bone remodeling following tooth extraction in a dog model. MATERIAL AND METHODS: For the study, fifteen male Beagles dogs of approximately 12 months of age were used. Mesial roots of four mandibular premolars were endodontically treated, and the distal roots were removed. ALN concentrations of 0.5, 1, and 2 mg/mL were topically applied for 15 min, while a sterile saline was used as a negative control. After the healing period of 1, 2, and 8 weeks, the samples were analyzed by micro-CT and histology. RESULTS: Treatment with ALN increased vertical distance between the lingual and the buccal crestal bones. While the ALN-treated sockets had preserved more lingual bone areas, control sockets showed better preservation of the buccal bone areas. ALN treatment resulted in more osteoid formation within the extraction sockets compared with the control. Higher bone volume was found in ALN groups than in the control at 2-week and 8-week healing periods, reaching the significant difference only for the extraction sockets pooled for the ALN treatment. CONCLUSIONS: Although ALN treatment could not prevent buccal bone resorption following tooth extraction in dogs, it proved beneficial for the preservation of the lingual bone and formation of new bone within the socket. There was no clear relation between the ALN dosages and the alterations within the extraction sockets. CLINICAL RELEVANCE: ALN affects bone remodeling of the extraction socket. The optimal concentration remains to be determined in future studies.

Tissue Response to a Porous Collagen Matrix Used for Soft Tissue Augmentation.

A short inflammatory phase and fast ingrowth of blood vessels and mesenchymal cells are essential for tissue integration of a biomaterial. Macrophages play a key role in this process. We investigated invasion of macrophages, blood vessels, and proliferating cells into a highly porous and volume-stable collagen matrix (VCMX) used for soft tissue augmentation around teeth and dental implants. The biomaterial was implanted in submucosal pouches in the canine maxilla, and the tissue response was analyzed at six different time points. Immunohistochemistry was done for proliferating cells (PCNA), macrophages (MAC387), multinucleated giant cells (CD86), and blood vessels (TGM2). Blood rapidly filled the VCMX pores. During the first week, MAC387+ cells populated the VCMX pores, blood vessels and PCNA+ cells invaded the VCMX, and CD86+ scattered cells were observed. At 15 days, MAC387+ cells were scanty, blood vessels had completely invaded the VCMX, the number of proliferating cells peaked, and fibroblasts appeared. At 30 days, MAC387+ were absent, the numbers of proliferating and CD86+ cells had declined, while blood vessel and fibroblast numbers were high. At 90 days, residual VCMX was well-integrated in soft connective tissue. In conclusion, the VCMX elicited a short inflammatory phase followed by rapid tissue integration.